The twelve outlet drip irrigation manifold head with ½ inch FPT utilizes extremely accurate pressure compensating individual and interchangeable drip emitters to ensure equal flow from each outlet over a wide range of operating pressures from 10 to 80 PSI. Features Constructed with 12 built-in individually pressure compensating drip emitters Self-flushing emitters allow passage of water and minimize clogging Interchangeable drip emitters for variable flow rates in a single head Color-coded drip emitters and barbs easily identify flow rate at each zone Each drip emitter individually filtered (approx. 80 mesh) Backup mini-disk filter Rugged materials to withstand the most adverse conditions Install above grade or place below grade in a 6” emitter box Inlet plugs provide the option to cap off up to eight drip emitters kits contain 100’ of 1/8” distribution tubing， accessories， stakes and 1/4” converter barbs allowing the use of 1/4” distribution tubing Specifications Flow rates: .6， 1， 2.2 and 3.3 GPH (2.2， 4， 8.3 and 12.5 L/H) Pressure compensating range: 8-80 PSI (.5 - 5.6 BAR) Recommnded operating pressure: 15-50 PSI (1 - 3 BAR) Inlet size: 1/2” FNPT Use with 1/8” (.187 OD) or 1/4” (.150 - .160 ID) distribution tubing Materials: Body and cover: high impact plastic Filter: nylon Diaphragm: silicon Filter requirement: minimum of 120 mesh Dimensions Dimensions: 3” W x 2” H (7.6 cm W x 5 cm H)INCLUDES : 100ft' 1/8" Vinyl Tubing， 1GPH 12-outlet Bubbler Manifold， 12 Drip Stakes， 8 Caps， 12 Bug Plugs， 12 Converter Barbs

12 Plant Drip Irrigation Kit!，INCLUDES : 100ft' 1/8" Vinyl Tubing， 1GPH 12-outlet Bubbler Manifold， 12 Drip Stakes， 8 Caps， 12 Bug Plugs， 12 Converter Barbs，Utilizes extremely accurate pressure compensating individual and interchangeable drip emitters，Operates with a wide range of incoming pressure PSI!，Constructed with 12 built-in individually pressure compensating drip emitters