Details
【Anti-cracking Reinforced Welded Joints】 Its shell is welded to resist corrosion and scale accumulation. The anti-cracking reinforced treatment also makes it safer to use.
 【Water Temperature Sensor】 It is embedded with a water temperature sensor， when the water temperature exceeds 55 ℃ or more will be overheating protection to stop operation.
 【Water Shortage Automatic Power-off Sensor】 The mist maker plate with stainless steel water shortage automatic power-off sensor， high sensitivity， can have to prevent the atomizer dry burn.

Specification

Housing Material: 304 Stainless Steel

Atomization Method: Ultrasonic

Power: 300W

Voltage: 110V

Plug: US Standard

Working Voltage: DC48V

Working Current: 6.25A

Frequency: 1.7MHz

Working Temperature: 5-55℃

Waterproof Rating: IP67

Applicable Water Quality: Conventional Tap Water， Electrolytic Water， Pure Water

Humidifying Capacity: 5kg(11.02lbs) / h

Indoor Coverage Area: 2.5m/ 8.2ft

Outdoor Coverage Area: 1.5m/ 4.92ft

Atomization Plate Size: 32*8.2*6.2cm/ 12.6*3.23*2.44in

Package Size: 39*16*18.5cm/ 15.35*6.3*7.28in

Net Weight: 3kg/ 6.61lbs

Gross Weight: 4.2kg/ 9.26lbs

Package Included

1* 12-head Atomization Plate

1* Waterproof Power Supply

2* Buoy Parts

All Accessories Needed

Notes

1. Please place the power supply in a ventilated and cool place， avoid immersing the power supply in water for a long time to work or exposing the power supply to the sunlight.

2. When using it for the first time， please adjust the buoyancy.

3. Please cut the middle foam into smaller pieces or add weight.

4. When using the mist maker， you need to be equipped with a power supply (output power ≥ 300W， output voltage of DC45V ± 3V); when using a toroidal transformer (to convert AC220V to AC36V)， you also need to be equipped with a rectifier board (to convert AC36V to DC48V)

5. After the mist maker is connected to the power supply， please put it flat in the water with the atomization head facing up and fully submerged in the water before turning on the power. When the mist maker is operating with power on， please avoid taking out the mist maker upside down to avoid damage.

6. The water surface is about 1cm/ 0.394in above the water level sensor of the mist maker， the atomization effect is appropriate. If the water is too deep， please equip the buoy.

7. Please note that the fog produced by the mist maker needs to be discharged by the fan to avoid fog stagnation on the water surface resulting in higher water temperature and shortening the life of the mist maker.

8. When more than one mist maker is in a container (interval of not more than 1m / 39.37in)， each mist maker quality inspection shell needs to conduct each other to prevent electrical corrosion of the mist maker housing and damage to the mist maker.

9. After a long time of work， the shell and atomization piece surface will deposit scale， affecting the service life and atomization effect. It is recommended that the mist maker is gently scrubbed with a soft cloth and rinsed with water once every half month.

10. Please avoid damaging the water level switch during the mist maker installation process， so as not to cause the water level switch to malfunction and cause the mist maker to go out of control. This will cause the atomization piece dry burn and serious damage to the mist maker.

11. When you find that the fogging piece is broken， please immediately disconnect the power and remove the mist maker from the water so that the water will not enter the electrical board and will not cause a short circuit.

• 【Ultrasonic Atomization】 It uses ultrasonic atomization， the atomization process ultrasonic waves will release a large number of negative ions， combined with the air floating soot， which can effectively remove smoke， carbon monoxide， bacteria， and other harmful substances and odors. And ultrasonic technology can produce fine water mist， if you drop the plant essential oil into the water， the fragrance will be emitted with the water mist， so that your room is full of fragrance.
• 【Large Mist Volume】 It has 12 fogging heads and has excellent humidification efficiency， reaching a mist volume of 5kg (11.02lbs) / h. The effect of such a large amount of fog makes you feel like you are in a wonderland.
• 【High Safety】 It has multiple protection functions， such as water shortage power-off protection， power reverse protection， and overheating protection. They add more security for your use.
• 【Good Waterproof】 It is filled with a waterproof sealant that can prevent leakage and cracking， effectively avoiding a short circuit. In addition， its power supply casing has an IP67 waterproof rating， so you can use it with confidence.
• 【Nozzle Independent Protection】 It has a fuse for each nozzle to do independent protection， even if a fog head is broken， the other fog heads can continue to operate.
• 【Long Service Time】 It is made of 304 stainless steel one-piece casting， which has good corrosion resistance and stronger resistance to intergranular corrosion. And it has a built-in copper plate radiator， which can play a good heat dissipation effect and prolong its service life.
• 【Guaranteed Customer Service】 We aim to provide quality products and services. If you have problems， please feel free to contact us. We will reply and solve the problem for you as soon as possible.