Specifications: 

Solar Panel:Polycrystalline sillicon ， 2W. 

Light Source:4PCSX0.5W （Φ10mmLED/white color light). 

Lumen:200LM. 

Storage Battery: 3.7V/2200mAh. 

Color Temperature:6000K. 

Working Time:6-9h. 

Charging Time:5~6h.

Function:Light control， daytime solar panels for battery charging， automatic night lights. 

IP Grade:IP65. 

Main Material: ABS+PS. 

Crust Color:Black . 

Item Size:29X9.5X34 cm Others:on/off switch. 

CHARGING AND OPERATION: 

1.When the switch is at the ”LOW” position， light intensity should be lower; when the switch is at the “HIGH” position，the light intensity is higher. 

2.Charge the solar product by placing it under direct sunshine for at least 8 hours. 

3.Illumination time after full charge :5-6 hours at “HIGH” level， 9-12 hours at “LOW” level in Summer. 

NOTE:In order to verify that the knob is correctly switched to “LOW’ position， cover the solar panel with your hand and the light will turn on at “LOW” level automatically. 

IMPORATANT: 

1.Install the solar product in an are where it can get direct sunlight. 

2.Push the switch to “LOW” position. 

3.Select an outdoor location away from other light source at night， such as street lights. It may cause the product can not be lit on automatically at night. 

4.Duration of light depends on solar product’s level of sunshine exposure， geographical locations，weather conditions and the hours of daylight. 

Note: 

1.Keep the solar panel clean. 

2.If solar product does not light up after it has been used for around 1.5 year， replace the rechargeable batteries as they may be weak or worn out.